Displaying 62 results for tag canister
  • FREE
    PSD Mockup Spray Can 85g forward shot
    PSD Mockup Banksy Black Spray Can 85g
    can038
    CAN030 is the final in our spray can series.  This PSD Mockup renders your early-stage sketches or finalized can design onto an 85g (3oz) spray can with a plastic cap (non-removable in this composition). The design is made to look like it is printed on the paper label which surrounds the body of the can.  The can itself is rendered to mimic a steel product, only the cap is made of plastic.  The background is fully transparent allowing for a custom background scene to be dropped into position.  Shadows and highlight effects are provided on individual layers and can be toggled off or decreased in intensity to suit your own needs.
  • PSD Mockup Spray Can 85g forward shot
    PSD Mockup Banksy Black Spray Can 85g
    can037
    CAN037 renders a common spray can with your design applied to the label wrapped around its surface.  This PSD Mockup represents a quarter-height can, one of the smaller cans in this category. The most popular use for this type of container is for shaving cream, paint spray, hair spray or low tack spray adhesive product. The cap colour for this product can be easily modified using the sample cap colour layer provided in the final render.  Highlights and shadows are also provided as familiar Photoshop layers with editable layer effects.  As with all PSD Mockups, the background can be hidden for a completely transparent effect or can be replaced with your own design.
  • PSD Mockup Spray Can 8ounce above view
    PSD Mockup Spray Can top 8oz Banksy Black
    can036
    CAN036 is an above shot of a spray can at 45°.  This PSD Mockup applies your sketch or final design onto this proxy representation of a 213g (8oz) spray can.  Once completed, the final render contains a basic set of highlights, shadows and a sample plastic cap layer for further customization.  The label design is made to simulate a stripe of printed sticky paper wrapped around the can, hiding or removing this layer will reveal the steel surface beneath the label.  The plastic cap however is a permanent fixture, hiding the cap will not reveal the familiar red spray nozzle.  This PSD Mockup is a great proxy for a paint spray can but can be useful for other products that share the same packaging such as hairspray, shaving cream or possibly liquid cheese...
  • PSD Mockup Spray Can 213g 8ounce forward
    PSD Mockup Spray Can 8oz Banksy Black
    can035
    CAN035 is a typical spray can with a plastic cap.  This PSD Mockup renders your supplied sketch or finalized designs onto a standing 213g (~8oz) spray can.  The completed render will present your artwork on a can with a 30° view from above the can looking down.  The samples included in this post make it seem the can is facing forward, however, you can easily render the side or back of the can. To do this, simply adjust your design in your template to display the area of the design to render. The background is transparent and simply appears white as this is the mockups default setup.  Changing the background image involves toggling off our default white background in favour of your own image.  Highlights and shadows are provided to help accentuate the spray can's depth and light sources.
  • FREE
    PSD Mockup Spray Can 340g 12ounce Above view
    PSD Mockup Spray Can 340g Top View
    can034
    CAN034 applies the supplied sketch or final designs to a standing proxy spray can with a 45° downward view. This PSD Mockup simulates a 340g (approx 12oz) spray can facing forward with light reflections placed on either side.  To make the can appear as if it was rotated to the left or right, simply offset your artwork in the template so that it is not perfectly centred. Highlights and shadow layers are provided as individual layers in the rendered final and can be modified to suit your needs.  The cap colour is also available on a separate layer — edit the layer effects to change the colour.
  • PSD Mockup Spray Can 340g 12ounce standing
    PSD Mockup Spray Can 340g
    can033
    CAN033 is a standing 340g (12 ounces) spray can with a plastic lid. This PSD Mockup renders your spray can design onto the can which is facing forward.  The view angle of the can is with a small downward view allowing the top of the can to be visible.  A worms eye view of the same 12 ounce PSD mockup can be found here. This can is meant to act as a proxy for presenting your artwork to fellow marketers, your clients, or to showcase on your site.  The colour of the plastic cap can be toggled off to reveal a pure white cap or it can be modified to any colour your product requires.
  • PSD Mockup Protein Powder Container 81oz
    PSD Mockup standing WHEY Protein Powder Container
    container004
    CONTAINER004 is a 2.5 quart (2.4L) container typically used for food products, in this case, the canister simulates a product typically found in use by sports enthusiasts who consume protein powders.  This PSD Mockup renders your final artwork or early-stage sketches onto a standing canister with a bird's eye view looking down at 45°.  The background, shown here in white, can be toggled off revealing the full transparency around the container for custom backgrounds.  The container itself is rendered as solid white with gradients but comes with a few colour samples for the plastic lid and plastic body.  Shadows and highlights are also fully editable after the final render allowing the designer to continue adding details beyond what this mockup provides.
  • PSD Mockup Above View Protein Powder Container 81oz
    PSD Mockup Above View ISO Energy Powder Container 2.4L
    container003
    CONTAINER003 is a standard plastic canister capable of holding 2.4L (2.5 quarts) of product. This PSD Mockup renders a designer's sketch or finalized artwork onto a standing, forward-facing container with a view looking down on the product from a slight angle. This container, modeled after canisters typically used to sell WHEY protein powder products, will be rendered to a new PSD with all the shape layers and effects such as highlights and shadows intact. Designers can freely modify the resulting layers to suit their own needs including the removable of the white background layer. The colour of the container lid as well as the whole canister can also be manipulated to be something other than the default white.
  • PSD Mockup Protein Powder Container 81oz
    PSD Mockup standing WHEY Protein Powder Container
    container002
    CONTAINER002 is a plastic, 2.5 quarts (2.4L), workout protein container facing directly forward.  This PSD Mockup renders the supplied artwork onto the design label which wraps around the entire whey protein canister typically used by sports enthusiasts as a food supplement. The final render presents the container as a standing product that faces directly forward with light sources from the left and right sides.  Visually, the product is rendered to appear as if it is at eye level with the viewer. The completed mockup is rendered to a new PSD where all the elements, layer effects, and shadows remain editable by the designer.  The background can also be toggled off if transparency around the container is desired.
  • FREE
    PSD Mockup Protein Powder Container 81oz
    PSD Mockup standing WHEY Protein Powder Container
    container001
    CONTAINER001 is a standing plastic protein container with an internal volume of 2.4L (2.5 quarts).  This particular PSD Mockup replicates a popular canister size used to sell protein whey powder products to bodybuilders.  By volume, this container simulates a 1kg (81oz or 1030g) product.  The final rendered mockup has a slight upward angle from the base of the canister suggesting the product is mighty, and that it is the leader in the product's category. The generated Photoshop document sports multiple layers allowing the designer to continue to easily manipulate resources for their own particular scenario.  The cap and body of the protein canister can also have their colour changed through existing layers which are hidden by default.
  • FREE
    can032
    CAN032 is an above shot looking down on a steel paint can mockup at 45°.  This Cover Action represents the 3rd set in the paint can series which also includes the 1 gallon (3,78L) and the 32oz (946mL) steel cans. This PSD Mockup applies your 2D sketch or finalized artwork onto the 236mL (8oz US Half Pint) paint can's product label for showcasing or including your designs in a marketing presentation.  The paint can is rendered with the lid closed (not removable, does not display paint product inside) and presented on a pure white background with a minimal amount of shading at the base of the can.  All highlights, shadows and the background itself can be modified by the designer after the rendering is complete.
  • can031
    CAN031 is a forward facing top-view steel paint can. This PSD Mockup applies your sketched or final 2D artwork directly to the label area on this 8oz (US Half Pint) paint can for client presentations, marketing material or simply showcasing your design. The paint can is rendered with a sealed lid, all highlights and shadows are rendered to individual layers and placed in a new PSD file which you can continue to edit and customize.  The background, shown here in white, can be toggled off to reveal a fully transparent background and ready for the placement of your own backdrop.
  • PSD 8oz Paint Can 1 US Half Pint Mockup
    PSD 236mL Can Mockup Facing Forward
    can030
    CAN030 is a front facing paint can mockup.  This PSD Mockup of a US Half Pint (8oz) steel can will render your design onto the paint can surface for the purpose of showcasing your design mockup on a glossy 3D product shot.  The paint can is rendered facing forward but can be made to appear as if it was rotated to the back or to either side simply by shifting the position of your design in the template prior to rendering the final. All assets are rendered out to a multiple layered document that can be further modified to adjust highlights, shadows and background (which is transparent).
  • PSD 8oz Paint Can 1 US Half Pint Mockup
    PSD 236mL Can Mockup Facing Forward
    can029
    CAN029 is a 1 US Half Pint (8oz) steel paint can.  The PSD Mockup is similar to the CAN025 946mL (32oz) paint can — this US Half Pint steel can is facing forward with the final render angle near the bottom of the can looking up.  The can in the real world is physically small and is easily clasped in the palm of one hand. To simulate the side or back of their paint can design the designer simply needs to shift their design in the template into the middle of the layout prior to rendering their final. This PSD Mockup cover Action renders the 8oz steel can into a newly created PSD with easy access to the multiple image layers and layer effects for further manipulation or customization.
  • FREE
    PSD Mockup 946mL Three Quarter Top View
    PSD Mockup 32oz Paint Can Steel Lid Three Quarter Top View
    can028
    CAN028 is a 3/4 birds-eye view of a 32oz steel paint can. This PSD Mockup is similar in appearance to the 1 Gallon CAN024 Mockup but will render your sketches or artwork to a 32oz paint can with a shiny lid firmly sealing the paint can. By default, the cover action renders the artwork facing forward. However, if the designer shifts the artwork horizontally within the template they can simulate the side and back of the paint can. All layers in the resulting PSD containing the 32oz paint can remain fully editable — all highlight, shadow and background layers can be modified to suit your own specific needs.