PSD Mockup Spray Can 213g 8ounce forward

CAN035

CAN035 is a typical spray can with plastic cap.  This PSD Mockup renders your supplied sketch or finalized designs onto a standing 213g (~8oz) spray can.  The completed render will present your artwork on a can with a 30° view from above the can looking down.  The samples included in this post make it seem the can is facing forward, however, you can easily render the side or back of the can. To do this, simply adjust your design in your template to display the area of the design to render. The background is transparent and simply appears white as this is the mockups default setup.  Changing the background image involves toggling off our default white background in favour of your own image.  Highlights and shadows are provided to help accentuate the spray can’s depth and light sources.

DOWNLOAD & Read
PSD Mockup Spray Can 340g 12ounce Above view

CAN034

CAN034 applies the supplied sketch or final designs to a standing proxy spray can with a 45° downward view. This PSD Mockup simulates a 340g (approx 12oz) spray can facing forward with light reflections placed on either side.  To make the can appear as if it was rotated to the left or right, simply offset your artwork in the template so that it is not perfectly centered. Highlights and shadow layers are provided as individual layers in the rendered final and can be modified to suit your needs.  The cap colour is also available on a separate layer — edit the layer effects to change the colour.

DOWNLOAD & Read
PSD Mockup Spray Can 340g 12ounce standing

CAN033

CAN033 is a standing 340g (12 ounce) spray can with plastic lid. This PSD Mockup renders your spray can design onto the can which is facing forward.  The view angle of the can is with a small downward view allowing the top of the can to be visible.  A worms eye view of the same 12 ounce PSD mockup can be found here. This can is meant to act as a proxy for presenting your artwork to fellow marketers, your clients, or to showcase on your site.  The colour of the plastic cap can be toggled off to reveal a pure white cap or it can be modified to any colour your product requires.

DOWNLOAD & Read
PSDcovers childrens hardbound book angled 45°

HARDBOUND015

HARDBOUND015 is an open hardbound book resting on a flat surface with a 45° rotation.  This PSD Mockup renders your supplied artwork onto a hardcover product shot for presentation and marketing of your children’s book designs.  The left and right page are rendered, and presented, facing up.  The result looks down on the book from a 45° position. All highlights and shadows are provided at default settings with the final render and can be adjusted manually to suit your needs.  The hardcover book itself is a proxy for an actual children’s book which measured 5.6in (143mm) wide by 8.2in (210mm) in height. The book’s thickness represents a book with approximately 100 pages.

DOWNLOAD & Read
PSDcovers childrens hardbound book angled 30°

HARDBOUND014

HARDBOUND014 is a child’s hardcover storybook looking down on the book from 45° and rotated to 30° on the flat surface. This PSD Mockup takes the supplied sketches or finalized artwork and begins to render a children’s hardcover story book placed on a flat surface with a view looking down at the final product. The final render is a full-page spread at the centre of the book — your design could represent 2 entirely different pages or 1 continuous design spanning both pages. Although the hardcover book was modelled after a real-world product, it is important to note that designers should approach this product as a proxy for a hardcover children’s book with similar characteristics.  The book on which this product was modelled contained 100 pages (200 double-sided) and measured 5.6 inches in width and 8.2 inches in height with a solid hard cover (no sleeve) and a glued spine.

DOWNLOAD & Read