Author Archives: Simon

HARDBOUND004 is a standing hardcover children’s book rendered from the front at 30°.  This PSD Mockup renders the supplied artwork or sketches onto the hardbound book.  The book is rendered in portrait mode, standing facing forward with a slight upward angle as if to suggest this book is the authoritative children’s story book.  This hardcover …

 

…more

 

HARDBOUND003 is a forward facing hardbound children’s book.  This PSD Mockup stands at 45° with the spine pointing into the distance away from view.  The hardcover book’s pages are visible and the overall thickness of the book represents approximately 200 pages while measuring 5.5 inches wide by 8.25 tall.  The final render for this book mockup applies the cover design to …

 

…more

 

HARDBOUND002 is a hardback children’s book which stands upright in portrait mode and faces forward.  This PSD Mockup stands at a 30° angle with a very small upward view making the book appear impressive to the viewer.  As a children’s hardcover book, the measurements are approximately 5.5 inches wide and 8.25 inches tall.  The thickness of the …

 

…more

 

HARDBOUND001 is a hardcover children’s book.  This standing PSD Mockup faces forward at a 45° angle with a slight view looking up to denote a mighty book.  This hardcover mockup will render the supplied sketch or final artwork directly onto the children’s book which measure’s roughly 5.5in wide by 8.25in tall.  The thickness of this hardbound …

 

…more

 

CONTAINER004 is a 2.5 quart (2.4L) container typically used for food products, in this case the cannister simulates a product typically found in use by sports enthusiasts who consume protien powders.  This PSD Mockup renders your final artwork or early stage sketches onto a standing cannister with a bird’s eye view looking down at 45°.  The …

 

…more

 

CONTAINER003 is a standard plastic cannister capable of holding 2.4L (2.5 quart) of product. This PSD Mockup renders a designer’s sketch or finalized artwork onto a standing, forward facing container with a view looking down on the product from a slight angle. This container, modelled after cannisters typically used to sell WHEY protein powder products, …

 

…more

 

CONTAINER002 is a plastic, 2.5 quart (2.4L), workout protein container facing directly forward.  This PSD Mockup renders the supplied artwork onto the design lable which wraps around the entire whey protein cannister typically used by sports enthusiasts as a food suppliment. The final render presents the container as a standing product which faces directly forward with light …

 

…more

 

CONTAINER001 is a standing plastic protein container with an internal volume of 2.4L (2.5 quarts).  This particular PSD Mockup replicates a popular canister size used to sell protein whey powder products to body builders.  By volume, this container simulates a 1kg (81oz or 1030g) product.  The final rendered mockup has a slight upward angle from the base …

 

…more

 

Welcome, and thanks for installing the PSDCovers panel!  If you haven’t installed the plugin yet you can find a detailed getting started guide here which will walk you through the entire process of installation and signing up to our service to access your first 100 free mockups.  This can be considered as a follow-up to the getting started guide which helps …

 

…more

 

PAPERBAG003 is a forward facing paper bag typically used in supermarkets.  This PSD applies your design concepts onto a forward facing paper bag generally found in grocery stores — the paper handles are not commonly associated with these however.  The final result, once renderd, stands facing forward at near eye level.  All the layers along with highlights, shadows …

 

…more

 

PAPERBAG002 is a generic paper bag from food supermarket. This PSD Mockup applies rough sketches or final artwork to be presented onto an empty shopping bag with handles made of paper. This cover action renders your shopping bag design almost instantly allowing you to generate multiple iterations and revisions for presentation a painless process. The …

 

…more

 

PAPERBAG001 is a standard grocery paper bag typically found at most food supermarkets.  This PSD Mockup renders your preliminary sketches or proposed artwork onto a standing 3/4 view of an empty shopping bag with handles.  The Cover Action for this 22 litre (5.8 gallon) bag makes rendering your client’s new supermarket shopping bag designs as painless as possible. …

 

…more

 

CAN032 is an above shot looking down on a steel paint can mockup at 45°.  This Cover Action represents the 3rd set in the paint can series which also includes the 1 gallon (3,78L) and the 32oz (946mL) steel cans. This PSD Mockup applies your 2D sketch or finalized artwork onto the 236mL (8oz US Half Pint) …

 

…more

 

CAN031 is a forward facing top-view steel paint can. This PSD Mockup applies your sketched or final 2D artwork directly to the label area on this 8oz (US Half Pint) paint can for client presentations, marketing material or simply showcasing your design. The paint can is rendered with  sealed lid, all highlights and shadows are …

 

…more

 

CAN030 is a front facing paint can mockup.  This PSD Mockup of a US Half Pint (8oz) steel can will render your design onto the paint can surface for the purpose of showcasing your design mockup on a glossy 3D product shot.  The paint can is rendered facing forward but can be made to appear …

 

…more

 

CAN029 is a 1 US Half Pint (8oz) steel paint can.  The PSD Mockup is similar to the CAN025 946mL (32oz) paint can — this US Half Pint steel can is facing forward with the final render angle near the bottom of the can looking up.  The can in the real-world is physically small and is …

 

…more

 

CAN028 is a 3/4 birds eye view of a 32oz steel paint can. This PSDmockup is similar in appearance to the 1 Gallon CAN024 Mockup but will render your sketches or artwork to a 32oz paint can with a shiny lid firmly sealing the paint can. By default the cover action renders the artwork facing …

 

…more

 

CAN027 is a 32oz paint can mockup with a slight view from above very similar to the 1 Gallon CAN023 mockup.  This PSD Mockup renders your final artwork or sketch designs onto a standing, forward facing, sealed 32oz steel paint can.  The steel lid reflects the light sources which can be modifed manually by editing the …

 

…more

 

CAN026 is a small 946mL steel paint can.  This PSD Mockup is the smaller version of the much larger 3,78L (1 Gallon) CAN022 paint can with the same viewing angle. This steel 32oz paint can applies your rough sketches or final artwork onto a standing, forward facing, paint can perfect for presentations, portfolios or marketing proposals. …

 

…more

 

CAN025 is a 32oz steel can of paint. This PSD Mockup is very similar to the 1 gallon CAN021 paint can with carry handle — this smaller 32oz product does not contain a steel handle. Sketches and final designs are rendered onto a forward facing steel paint can with a slight upward angle which denotes …

 

…more